Rapid Prototyping/Mass production,PCB Manufacturer,PCB assembly house services, PCBA Contract Manufacturing

PCB Assembly, Electronic product Contract Manufacturing Services, print circuit board Assembly Services, EMS/OEM Manufacturer, Electronic Assemblers, SMT House In Shenzhen China, PCBA Outsourcing Services, Electronic board soldering, Mass production EMS.

PCBSINO Design Engineering Department also can do many project Design Engineering work,Layout design development,electronics hardware, software,schematic circuit diagram,CAD services,;

Rapid Prototyping Manufacturing Services - View assembly Line
Electronic manufacturing services(EMS): High quality Rapid Prototyping for both PCB and PCBA,

 
 

Rapid Prototyping/Mass production,PCB Manufacturer,PCB assembly house services, PCBA Contract Manufacturing

EMS / Contract Electronic Manufacturing

I received your last quote, after you made the adjustment for few parts prices, and the total cost is totally way off
Hi ,
Hello ,
PCB Assembly----->prototypes, small runs, and high volume.
Custom Wire and Harnesses
Box building
Components supply ,free tooling charge;
Making prototypes in one week; Important point: Cost down on your
volume order; Offer 12 months warranty on our assembly jobs; One
stop Box build and moulding in house
 ,
 
Attached is transfer info for balance.
 
Best regards,
 
 Dungan
, Inc.
The Woodlands, Texas
Mobile:
 
From:  [mailto:]
Sent: Friday, May 12, 2017 10:38 AM
To:  <>
Subject: Re: Re: Re
 
ok
 
________________________________________
Kind Rgds,
 
 

www.

 

 

Office Address:

Postcode:518057

From:
Date: 2017-05-12 22:23
To:
Subject: Re: Re
I will send added funds, please start assembly.
Best regards,

Dungan
President
, Inc.
Houston Sales Address
39 N. Lansdowne Circle
The Woodlands, TX 77382
Mobile:

www..com

ISO9001:2008 Certified

Sent by an employee of , Inc. This email and any attachments are confidential and meant solely for the use of the intended recipient.  Anproprietary  product information as to functionality, features, benefits and capabilities disclosed in this email are not to be shared with competitors of , Inc. If you are not the intended recipient and have received this email in error, please notify us immediately by replying to the sender and then deleting this copy and the reply from your system without further disclosing, copying, distributing or using the e-mail or any attachment.

On May 12, 2017, at 6:48 AM, "" <> wrote:
Hello ,
yes you are correct.
price no change from last quotation.

________________________________________
Kind Rgds,

www.

 

.
Skype: hl
Office Address:

Postcode:518057

From:
Date: 2017-05-12 19:41
To:
Subject: Re: Re
How much more? $901.05?
Best regards,

Dungan
President
, Inc.
Houston Sales Address
39 N. Lansdowne Circle
The Woodlands, TX 77382
Mobile:

www..com

ISO9001:2008 Certified

Sent by an employee of , Inc. This email and any attachments are confidential and meant solely for the use of the intended recipient.  Anproprietary  product information as to functionality, features, benefits and capabilities disclosed in this email are not to be shared with competitors of , Inc. If you are not the intended recipient and have received this email in error, please notify us immediately by replying to the sender and then deleting this copy and the reply from your system without further disclosing, copying, distributing or using the e-mail or any attachment.

On May 12, 2017, at 6:38 AM, "" <> wrote:
Hello ,
sorry the total amount is not correct.
884USD is just manual work, also need add material charge.
we had quote you for 3 type cable before,
now update the quotation file.


________________________________________
Kind Rgds,

www.

 

.
Skype: hl
Office Address:

Postcode:518057

From:  Dungan
Date: 2017-05-11 23:16
To:
Subject: RE: Re
,

Please ship cables as soon as you can. Also, can you ship balance left over of PCBs with no cables in same shipment?

Best regards,

Dungan
, Inc.
The Woodlands, Texas
Mobile:

From:  [mailto:]
Sent: Wednesday, May 10, 2017 10:46 PM
To:  <>
Subject: Re: Re

Hello ,
do you mean this 1X8pin one?
<image001(05-12-19-34-05).jpg>



________________________________________
Kind Rgds,

www.

 

.
Skype: hl
Office Address:

Postcode:518057

From:
Date: 2017-05-09 22:29
To:
Subject: Re
,
We are just going to do 500 cables with PCB boards. Then ship us balance of PCB boards left over. The cable with connector on both ends will be redesigned with latching plug. That will be separate order.

Can you send price for 500 cables with PCB?

Best regards,

Dungan
President
, Inc.
Houston Sales Address
39 N. Lansdowne Circle
The Woodlands, TX 77382
Mobile:

www..com

ISO9001:2008 Certified


Virus-free. www.avg.com

<quote_PCBSINO cable 1x8 500pcs.xls>

 

I'm Juraj from Taphome company, we have bought from you pcb's for our DO12 and 24UI modules, for the assembly part we need Panelization documents.

Can you send me those files please?

Thank you.

Best,

Taphome
Juraj Palencar

Are you able to provide me only two BGA packages (U7 and U1) assembly as per BOM data ?
Hi ,

Ok, are you testing each one before you send them?

Can you please also check my attached photo and ensure all the connectors are raised.

Thank you,
Louis

From:  [mailto:]
Sent: 04 July 2017 01:28
To: turnspro <>
Subject: Re: RE: last batch wire diameter

Hello Louis,
almost finish,
can send out next week.

________________________________________
Kind Rgds,

www.

 

.
Skype: hl
Office Address:

Postcode:518057

From:
Date: 2017-07-04 00:34
To:
Subject: RE: RE: last batch wire diameter
Hi ,

How is the manufacturing of the PCBs going?

When will they be finished?

Thanks,
Louis

From:  [mailto:]
Sent: 12 June 2017 10:53
To: turnspro <>
Cc: Abbey Quantrill <supportturnspro.com>
Subject: Re: RE: last batch wire diameter

Hello Louis,
there must be some mistake.
15AWG wire is very thick wire
15AWG wire copper diameter is 1.45mm.
but your board 4 hole to assembly wire, hole diameter is just 0.7-0.8mm.
15AWG wire can't plug into it.
so it is not possible use 15AWG wire.
22AWG copper diameter is 0.643mm, this one is better
21AWG will hard to plug into the PCB hole, 21AWG wire copper diameter is 0.724mm




________________________________________
Kind Rgds,

www.

 

.
Skype: hl
Office Address:

Postcode:518057

From:
Date: 2017-06-12 17:20
To:
CC: 'Abbey Quantrill'
Subject: RE: last batch wire diameter
Hello ,

Wires must be 15Awg and 12cm long.

Thanks,

Louis

From:  [mailto:]
Sent: 12 June 2017 10:01
To: turnspro <>
Cc: Abbey Quantrill <supportturnspro.com>
Subject: last batch wire diameter

Hello Louis,
can you test last batch wire diameter and tell me?
our supplier mix-up the old wire and new wire diameter

________________________________________
Kind Rgds,

www.

 

.
Skype: hl
Office Address:

Postcode:518057

From:
Date: 2017-06-06 17:26
To:
CC: 'Abbey Quantrill'
Subject: RE: RE: Sending the 1800 pcbs back to you
Hi ,

Have you repaired them with the thicker wire?  We need them to have the thicker wire.


We are still going through testing of the latest batch.  We can send you the faulty PCBs back to you once we have completed testing for you to repair.


We would like to order another 1000 PCBs from you, can you please send a quote.

You can then send all the PCBs together, once they have been tested by you.

Is that ok?

Thanks,
Louis



From:  [mailto:]
Sent: 06 June 2017 10:12
To: turnspro <>
Cc: Abbey Quantrill <supportturnspro.com>
Subject: Re: RE: Sending the 1800 pcbs back to you

Hello Louis,
we have repaired but not test yet.
most are wire soldering problem
can we send together with the bad boards you will told me for this latest batch?

________________________________________
Kind Rgds,

www.

 

.
Skype: hl
Office Address:

Postcode:518057

From:
Date: 2017-06-05 21:41
To:
CC: 'Abbey Quantrill'
Subject: RE: RE: Sending the 1800 pcbs back to you
Hi ,

It seems that only some in the first box were faulty, which is good.  We will send the faulty back to you once we have fully tested all the other boxes.

Have you re-made the 141 we sent back to you?  When should we expect to receive them back?

Thank you,

Louis
From:  [mailto:]
Sent: 08 May 2017 03:59
To: turnspro <>
Cc: 'Mark Smith' <markturnspro.com>; Abbey Quantrill <supportturnspro.com>; 'Chris Coles' <christurnspro.com>
Subject: Re: RE: Sending the 1800 pcbs back to you

Hello Louis,
what percent % is fauty boards?
can you tell which part is fauty?
if not serious problem can you choose the good boards out?

________________________________________
Kind Rgds,

www.

 

.
Skype: hl
Office Address:

Postcode:518057

From:
Date: 2017-05-08 02:18
To:
CC: 'Mark Smith'; 'Abbey Quantrill'; 'Chris Coles'
Subject: RE: Sending the 1800 pcbs back to you
Hello ,

We tested the first 15 an they were ok.

We have not had a problem with shorting before so assumed the rest would be ok.  Has your manufacturing method changed?  The products are faulty, we would expect you to pay for the shipping cost for faulty products.  We think that is reasonable, do you not think that is reasonable?

Louis

From:  [mailto:]
Sent: 07 May 2017 12:22
To: turnspro <>
Cc: 'Mark Smith' <markturnspro.com>; Abbey Quantrill <supportturnspro.com>; 'Chris Coles' <christurnspro.com>
Subject: Re: Sending the 1800 pcbs back to you

Hello Louis,
but you tell me send all the boards to you after you testing 200pcs
we base on your instruction to send out all the boards.
if not we will test all the boards.
if send back all the boards need your side pay the shipping charge

________________________________________
Kind Rgds,

www.

 

.
Skype: hl
Office Address:

Postcode:518057

From: Turns Pro
Date: 2017-05-07 16:12
To:
CC: Mark Smith; Abbey Quantrill; chris
Subject: Sending the 1800 pcbs back to you
Hello ,

We are getting some shorting on the Pcbs where the wires connect to the board. This is causing the AA batteries to get hot and is a fire risk.

---- On jue, 11 may 2017 19:11:31 -0600 manuelmultiserviciosrohi.com wrote ----

Hello ,
Attached the payment.
Need a shipping date.
Remember to ship to my attention and new address.
Thanks

 

---- On mar, 09 may 2017 22:19:30 -0600  wrote ----

update again.

Kind Rgds,

www.

 

.
Skype: hl
Office Address:

Postcode:518057

From: Manuel
Date: 2017-05-10 12:13
To:
Subject: Re: Fwd: Re: Fwd: Re: Fwd: Re: MM PCB and Assy
, the description for line 2 is wrong.

El 08/05/2017 a las 21:43,  escribió:
Hello Manuel,
update.

Kind Rgds,

www.

 

.
Skype: hl
Office Address:

Postcode:518057

From:  T
Date: 2017-05-09 06:52
To:
Subject: Re: Fwd: Re: Fwd: Re: Fwd: Re: MM PCB and Assy
,
Sorry I forgot to tell you we are going to oeder only pcbs not assembly. So plwaseupdate the invoice for pab and flex.
Thanks

---- On lun, 08 may 2017 02:09:44 -0600  wrote ----

Hello Manuel,
update.

Kind Rgds,

www.

 

.
Skype: hl
Office Address:

Postcode:518057

From: Manuel
Date: 2017-05-08 10:59
To:
Subject: Fwd: Re: Fwd: Re: Fwd: Re: MM PCB and Assy
Hello ,
I am going to order 105 pcs for the Hard pcb. It has a new Rev, attached the new Gerber.
And will need 102 pcs of the Flex one, but need at $13 ea.
Add the cost of the freight
Please send me the Invoice to proceed with the transference

-------- Mensaje reenviado --------
Asunto:  Re: Fwd: Re: Fwd: Re: MM PCB and Assy
Fecha:    Thu, 16 Feb 2017 17:15:50 +0800
De:  <>
Para:      T <manuelmultiserviciosrohi.com>

Hello Manuel,
FYI. update

2017-02-16
Kind Rgds,

www.

 

.
Skype: hl
Office Address:

Postcode:518057

From: Manuel
Date: 2017-02-16 05:24
To:
Subject: Fwd: Re: Fwd: Re: MM PCB and Assy
Attached the 2 quotations you sent before for 1500 pcs. Hard pcb, Flex pcb and assembly.
Now please send a quotation for 105 pcs, Hard and flex PCBs and assembly.
We will provide parts.
Thanks.

El 15/02/2017 a las 14:48, Manuel Saborío T escribió:
---------- Mensaje reenviado ----------
De: "" <>
Fecha: 30 ago. 2016 8:31 AM
Asunto: Re: MM PCB and Assy
Para: "manuelsaborio" <manuelsaboriogmail.com>
Cc:

Hello Manuel,
this board components part is expensive.
you can supply some part to us.

 

2016-08-30
Kind Rgds,

www.

.
Skype: hl
Office Address:

Postcode:518057

From:  T
Date: 2016-08-29 11:25
To:  
Subject: MM PCB and Assy
Hello , how are you?
Some months ago you made 300 pcb for the attached file. Now I need a quotation for 1500 pcs, plus assembly.
Please include lid time, and freight cost.
Can you make this turnkey?

 

Are you able to read emails from any gmail account?

Regards.

,

I had trouble understanding that. You mean you can leave off the unnecessary components with no extra charge?

Thanks,
Brett

On May 10, 2017, at 9:55 PM, "" <> wrote:

Hello Brett,
that's ok
also we can don't assembly the useless part is ok

Kind Rgds,We're the professional OEM manufacturer in China with over 16
years and we can offer you the service in pcb assembly,cable
assembly,components sourcing and pcb layout,testing,etc.

We can offer the services covering these:
PCBs production,up to 16 Layers
Component procurement
PCBs assembly (SMT & DIP)
AOI,ICT,X-RAY,FunctionaL Testing
Moulding and plastic injection
Cable Assembly
Switching Power Supply

www.

 

.
Skype: hl
Office Address:

Postcode:518057
We are specializing in  cable assembly and  RF connetor,Arrester for more than 18 years.

we are provide :
RF connector:SMA,SMB,MMCX,MCX,BNC,N,TNC,7/16.
cable assembly:cables choose by clients.
Antenna,Arreater

OEM and ODM are acceptable.
We can produce Low PIM product  (165dbc)
We have certification : ROHS , ISO9001 ,ISO14001

We can supply  free samples for testing.We have a project of a small PCB. Here it's made a manual assembly, but we'd like to
buy the whole PCB from your company.
We need of a quotation of the PCB. It's necessary to include:

1. The PCB manufacturing. Material: FR-2 or FR-4
2. Components.
3. Assembly.

Observations:
1. The wires should not to be included because of the weight to shipping.
2. The resistors R4,R5 and the capacitor C5 don't need to be soldered because they are components to select features. We can do it here.
3. The TRIAC is soldered in the PAD of a SOT-223 package because we intend to use a SOT-223 TRIAC in the next circuits. But now we are using a through hole TRIAC.

From: Brett Donofrio
Date: 2017-05-10 23:27
To:  (boards)
Subject: Board change cost
,

I have a question about a change to the board. Is there a cost for taking off most of the components entirely? Maybe instead of changing the gerber, just leave them off of the board? I am interested in removing everything but the transistor and putting a 135ohm resistor between r1 and r2 (or 2 270ohms in parallel to achieve this value).

We will be ordering very soon, we are down to our last test and it has led us to this configuration.
This particular special project is projected to average about 100 pieces per month in sales, where we would reorder every quarter, or as the need arises.
Could you please send me information regarding:
1. the set up charges?
2. cost per unit?
3. lead time required to ship an order?
4. we generally require 5 pieces of each item for initial evaluation, so please quote initial prices on that volume. Also quote in quantities of 100, 250, 300 and 500 pieces.
While this item will be sold around the world, our assembly and repair facilities will located in the Philippines.   Please direct all answers and shipping calculations to:
Thanks,
Brett Please send me an offer for 5 pcs by attached file.
Follow the specification:
4-Layers, FR4 1.60 mm, 35 µm finish all Layers, chem.Gold, green mask x 2, white silkscreen x 2, e-test.
We need shipping cost in your offer for delivery PCBs with assembly CY8C5888LTI-LP097 by DHL to Bulgaria.


T.        

ONE-Stop PCB
ASSEMBLY service to save your manufacturing cost.

 

 Avast logo  
El software de antivirus Avast ha analizado este correo electrónico en busca de virus.
We will not sign for the pcbs when they arrive. They will be sent back to you to be tested or remade.

Do you understand?